Gearboxes and geared motors

... from the modular system of the Italian manufacturer HYDRO-MEC are characterised by excellent quality and an attractive price-performance ratio.

Further strengths are the short-term availability of the products and their compatibility with a large number of German and Italian competitor makes. This is made possible by the modular and flexible construction kit system, which is specially designed for distributors and allows a large number of product variants to be assembled and delivered at short notice.

All products and components are manufactured in Europe using the latest technologies in design and production so that the highly efficient gearbox programme can be offered in line with today's market requirements.

4

Worm gearbox, round design

Worm gearbox in round design for mounting IEC standard motors. One-piece housing made of aluminium alloy, vacuum-impregnated, no secondary Finnish required. Patented coupling module for realising various input shaft diameters. Wide range of mounting components for easy self-assembly.

6 sizes
030 to 085
for motor outputs
0.06 to 6.1kW
Reduction ratios
5 to 100 (higher possible on request with spur gear pre-stage)
Max. torques
21 to 347Nm
Housing variants
Push-on version with torque arm, foot and flange version

The following options are available in the product configurator:

Housing design, output shaft (hollow shaft, solid shaft, single and double-sided), installation position, input flanges and shaft couplings for different IEC add-on motors

to the products

Worm gearbox, square design

Worm gearboxes in square design for mounting IEC standard motors. Up to size Q85, one-piece housing made of aluminium alloy, vacuum-impregnated, no secondary Finnish required. From size Q11, grey cast iron housing with RAL7046 paint finish. Patented coupling module for realising various input shaft diameters. Flexible mounting thanks to a large number of machined mounting surfaces and drill holes. Extensive range of add-on components for easy self-assembly.

6 sizes
Q30 to Q15 (online to Q85)
for motor outputs
0.06 to 6.1kW
Reduction ratios
5 to 100 (higher ratios possible on request with spur gear pre-stage)
Max. torques
21 to 347Nm
Housing variants
Foot and flange version, slip-on version with torque arm

The following options are available in the product configurator:

Housing design, output shaft (hollow shaft, solid shaft, single and double-sided), mounting position, input flanges and shaft couplings for different IEC add-on motors

to the products

Helical gearbox, aluminium housing

Housing made of aluminium alloy, vacuum impregnated, no secondary Finnish required. Removable inspection cover. Bolt-on foot adapter plates with patented mounting system. Thanks to this flexible system, various axle heights and hole patterns can be realised. Patented coupling module for mounting with different input shaft diameters.

6 sizes
412A to 613A (other types with grey cast iron housing available on request)
for motor outputs
0.06 to 7.5kW
Reduction ratios
3.5 to 480 (online 5-100 available)
max. torques
175 to 530Nm
Housing variants
Foot and flange version

The following options are available in the product configurator:

Housing design - various foot and flange designs, input flanges and shaft couplings for different IEC add-on motors

to the products

Worm geared motor, round design

Worm gearbox in round design with three-phase asynchronous motor. One-piece gearbox housing and add-on motor made of aluminium alloy, vacuum-impregnated, no secondary Finnish required. Extensive range of add-on components and options can be selected in the product configurator.

6 sizes
030 to 085
Motor outputs
0.06 to 4kW
Speeds
14 to 280 rpm (lower speeds are possible on request with spur gear pre-stage)
Torques
2 to 430Nm
Housing variants
Foot-mounted and flange-mounted version, slip-on version with torque arm

The following options are available in the product configurator:

Housing design, mounting position, terminal box position, shaft design (hollow shaft, solid shaft, single and double-sided), motor protection, brake, forced cooling fan

to the products

Worm geared motor, square design

Worm gearbox in square design with three-phase asynchronous motor. Up to size Q85, one-piece housing made of aluminium alloy, vacuum-impregnated, no secondary Finnish required. From size Q11, grey cast iron housing with RAL7046 paint finish. Add-on motors with aluminium housing. Flexible mounting thanks to a large number of machined mounting surfaces and drill holes. Extensive range of add-on components and options can be selected in the product configurator.

6 sizes
Q30 to Q15 (online to Q85)
Motor outputs
0.06 to 5.5 kW
Speeds
14 to 280 rpm (lower speeds are possible on request with spur gear pre-stage)
Torques
2 to 430Nm
Housing variants
Foot-mounted and flange-mounted version, slip-on version with torque arm

The following options are available in the product configurator:

Housing design, mounting position, terminal box position, shaft design (hollow shaft, solid shaft, single and double-sided), motor protection, brake, forced cooling fan

to the products

Helical geared motor, aluminium housing

Helical gearbox with asynchronous motor. Housing made of aluminium alloy. Vacuum impregnated, no secondary Finnish required. Removable inspection cover. High compatibility with competitor makes thanks to a wide range of base and flange variants. Extensive range of add-on components and options can be selected in the product configurator.

6 sizes
412A to 613A (other types with grey cast iron housing available on request)
Motor outputs
0.06 to 5.5kW
Speeds
14 to 279 (lower and higher speeds are possible on request)
Max. torques
13 to 687Nm
Housing variants
Foot and flange version

The following options are available in the product configurator:

Foot or flange versions, installation position, terminal box position, shaft version (hollow shaft, solid shaft, single and double-sided), motor protection, brake, forced cooling fan

to the products

Spare parts

Attachment components for worm and helical gearboxes.

  • Mounting components for types: 030-085, Q30-Q85, 412A-613A
  • Shaft couplings for add-on motors
  • Input flanges for IEC add-on motors
  • Torque arms
  • Foot kits
  • Output flange kits, output shafts
to the products

Modular system for customised products & fast delivery

Product configurator for easy selection of the right product. Express deliveries are also possible with the express assembly option.

Documents

High compatibility for easy replacement

... of competitor products to be replaced is possible thanks to a large number of shaft, base and flange variants.

Do you have any questions about our HYDRO-MEC product range?

We will be happy to advise you:

  • Product selection for new designs and for replacement in existing systems
  • Extended options (bearings, stainless steel shafts, ATEX ...)
  • Agreement of framework contracts for faster availability of larger purchase quantities
Contact us on
+49 345 68243 70
Mon-Fri: 8-16 h
i nfo@ele ktromotorenmarkt.de